GRP Booster Set Enclosure PWH-2x1x1.5

GRP Booster Set Enclosure PWH-2x1x1.5

Our GRP enclosures are suitable for the protection of a number of items of industrial equipment, including our own water storage tanks, pump sets, valves in fact there is a housing to suit virtually any industrial product.
Used by Gas, Water and Electricity providers and local authorities along with the Mechanical services industry and many others.

General Construction

Our GRP housings are manufactured from the highest quality GRP materials to withstand the rigours of the harshest weather conditions.

All enclosures have a tough weather resistant polyester gel coat outer, reinforced with a GRP laminate incorporating an encapsulated polyurethane foam core to provide insulation. External colour options are RAL6005 Green or BS 00A05 Industrial Grey. Other colours are available on request.

Insulation is 25 mm thick as standard. This can be increased to a maximum of 100 mm for extreme temperature applications.

Internal finish is a durable polyester gel coat finish in white.

Configurations start as small as 800 x 200 x 800 mm high, up to infinite size.

Available as one-piece units for smaller applications or in sections in 500 mm increments in length and width up to a height of 3 metres.

Door furniture includes stainless steel hinges and fixings, Yale type night latch lock assemblies, External door handles, internal door check straps and stays.

 

PWH3001 Dimensions

	Lx W x H (mm)
Internal Dimensions	2000 x 1000 x 1500
External Dimensions	2150 x 1150 x 1580
Door Configuration	Double 1600 x 1300 opening
Internal Ply Mounting Board	Included 600 x 1220

Product range

• Smaller GRP enclosures are available as a single piece unit, which are normally delivered to site palletised and only require fixing down to a structural slab or raised kerbing.
• Larger enclosures are constructed in a metric modular format and can be assembled at our works for delivery as a single unit or, where access restrictions apply, be supplied in sections to allow assembly on site.
• On site assembly is carried out by our own, directly employed engineers. Purewater do not use subcontract labour for enclosure assembly.

 

Accessories

• Encapsulated ply backing boards for electrical components and switchgear.
• Tubular heaters and thermostats for frost protection.
• Bulkhead lighting c/w switch.
• Screened spill over screens to the housing walls (to comply with water regulations, back flow prevention).
• Factory prepared pad areas to allow for pipework to pass through housing walls.
• Single or double door assemblies.
•  Access man ways to housing roof for applications where space restrictions apply.

 

Enquiries

Please contact us and let us know the size of the GRP housing or enclosure required along with any site specific details, such as access restrictions which may apply, and we will be happy to provide a detailed quotation.

 

Delivery

All our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and/or machinery to help unload the tank/s from the delivery vehicle.

If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.

• Product Code: PW
• Customer Offloading: Customer Offloading
• Material: GRP
• Shape: Rectangle
• Stock tank: Made to Order, Non Returnable Product