Floodmate 3 – Emergency Flood Pump Kit

Flood Mate 3 – Emergency Flood Pump Kit

This emergency pumping kit has a powerful pump, two packs of Hydrosacks and discharge hoses for defending a property from low level flooding. Depending on which kit is selected, the pump is designed to pump water levels down to a level of between 3 mm and 1 mm. Hoses are light, easy to position and feature quick connections to enable fast deployment in an emergency. Supplied in a sturdy easy-carry case, there is sufficient space within to not only store the pumping equipment but keep other flood protection products e.g. emergency grab bags, emergency meals etc.

Flood Mate 3 Kit Contains:

• WX10 Pump
• Phase 1 hose kit: 10 metres of 25 mm (1″) non-kink pipe with quick release connectors. Ideal for pumping near the property, e, g. Over window ledges, steps, walls, Hydrosacks, sandbags etc.
• Phase 2 hose kit: 10 metres of 25 mm (1″) lay-flat pipe with quick release connectors. Ideal for pumping over flat surfaces e.g. over ground, away from the property.
• 2 Hydrosacks.
• Easy carry case with lid and 2 fastening straps (400W x 600L x 420H).

 

WX10 Pump Information

Honda engine driven pump, with a 1.5HP engine and weighs 6.1kgs (dry). This is supplied with a quick release discharge connector, a 4 metre, quick release suction hose, and a low level suction tool. It will pump approximately 80 litres per minute across 30 metres of level ground with a 1metre incline, when using 25 mm (1″) hose. Initial priming of the pump with water is required before starting. It will pump water down to 3 mm, but it must not run dry. Ideal for use when electricity is not available.

 

Delivery

All our Flood Kits are for delivery by customer offload. This entails the customer to acquire the right manpower and/or machinery to help unload the tank/s from the delivery vehicle.